Clevis hangers come in different sizes and
load capacities, Triple S Industries provides
the engineering and support to select the appropriate hanger based on the specific application and the weight of the suspended item complying with International Building Code, International Standard, local building codes and regulations to ensure proper support and safety.
Applications:
Sizes: Min 1”- Max 8”
Material: Mild Steel.
Finish or Coating:
Electro-galvanized, Hot Dip Galvanized, Epoxy coatings
Approvals:
ANSI/MSS SP58- & SP69-(Type 1)
Certification: UL
Applications:
Provide vertical support to non-insulated piping systems
Sizes: Min 1”- Max 3”
Material: Mild Steel. Other materials can be provided on request.
Approvals:
ANSI/MSS SP58- & SP69-(Type 10)
Maximum Temperature: 343°C(°650F)
Finish Available: Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake & Epoxy Coated.
Certification: UL
Applications:
Sizes: Min 4/3”- Max 4”
Material: Carbon steel, Stainless steel, Pre-Galvanized Steel.
Finish: Electro-galvanized Hot Dip Galvanized, Epoxy coatings.
Certification: UL
Typically made of galvanized steel or stainless steel for enhanced strength and corrosion resistance. The rubber lining on the clamp provides cushioning and helps absorb vibrations, reducing noise and pipe damage.
Applications:
Sizes: Min 4/3”- Max 4”
Material: Carbon steel, Stainless steel, Pre-Galvanized Steel.
Finish: Electro-galvanized Hot Dip Galvanized, Epoxy coatings.
Certification: UL
Applications:
Sizes: Min 2/21”-Max 6”
Material: Mild Steel. Also, other materials can be provided on request.
Maximum Temperature:
343˚C (650˚F)
Finish: PLAIN, Electro-Galvanized,
Hot Dip Galvanized & Zinc Flake
Approvals:
ANSI/MSS SP58- & SP69-(Type 8)
Certification: UL
Applications:
TAV Triple S U-Bolts are used to secure piping to structural members.
When the piping is below the structural member, the U-Bolt provides vertical support and restricts lateral movement while allowing for axial movement.
When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping.
Sizes: Min 2”-Max 6”
Maximum Temperature:
399˚C (750˚F)
Material: Mild Steel. Other materials can be provided on request.
Finishing:
PLAIN, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake
Approvals:
ANSI/MSS SP58- & SP69-(Type 8)
Certification: UL
Applications:
TAV TRIPLE S standard pipe strap is recommended for supporting a piping system with fittings vertically or horizontally to walls or ceilings. It can be used as a restrainer when installed on top of structural wood beams for beam, for limiting pipe movements due to thrust loads during sprinkler system start up.
Sizes: Min 4/3 ”-Max 12”
Material: Mild Steel. Also other materials can be provided on request
Finish Available: Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake, & Epoxy Coated.
Approvals: ANSI/MSS SP58- & SP69-(Type 26)
Applications:
TAV Triple S slotted channel has been specially designed as a support system for mechanical, electrical and plumbing installations which can be attached to existing steel structure or concrete inserts. This range of slotted channels are available in either slotted or plain, to accommodate for a range of applications.
Slotted channels can be rapidly and easily connected together using various specialized strut-specific fasteners, bolts &angle fittings. It can be assembled very rapidly with minimal tools, which reduces costs significantly in many applications.
Sizes: Min 41x21x-1.5 Max 41x41x2.5
Material: Mild Steel. Also, other materials can be provided on request.
Finish Available: PLAIN, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake
Applications:
U-washers are used to distribute the load of a threaded fastener, such as a bolt or nut. Before a screw or bolt is driven into a surface, a washer may be placed in order to prevent looseness and provide protection. This also prevents the bolt head and nut from damaging the surfaces of the two fastened parts.
Sizes: M8, M10, M12
Material: Mild Steel. Also, other materials can be provided on request.
Finish Available: Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.
Coupling nuts are used to join two threaded rods or pipes, including threaded rods or pipes of different sizes.
Usually constructed in a hex shape for wrench hold, the most common uses for coupling nuts include tightening rod assemblies or pushing a completed rod assembly outward.
Sizes: M6, M8, M10, M12, M16
Material:
Mild Steel. Also, other materials can be provided on request.
Finish:
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.
Application:
Rail nuts are used to fix an external threaded part inside the slotted channel.
Its shape is designed to not allow circular motion when fitted inside the channel.
It is an internally threaded Rectangular metal piece to fit in slotted channels.
Sizes: M6, M8, M10
Material: Mild Steel. Other materials can be provided on request.
Finish:
Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.
Length: Min 300 to 1000 Max
Material: Mild Steel. Other materials can be provided on request
Finish Available: Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.
Applications:
TAV Triple S wall bracket is used to attach a slotted
strut channels to walls.
The vertical and horizontal holes in the base plate enable simple alignment of the Saddle support.
Good load transfer due to the high bending stiffness of the saddle connection.
deal connecting element for channel section structures.
Material: Mild Steel. Other materials can be provided on request.
Finish: Plain, Electro-Galvanized, Hot dip Galvanized,
Re-Galvanized & Zinc Flake.
Size Range:
M16 to M36 in metric series
