U Bolt

Used to secure piping to structural members. It provides vertical and horizontal support allowing axial movement.

• Type: With Lining, Without Lining
• Material: Mild Steel. Also other materials can be provided on request
• Sizes:     Min – 1/2″ | Max – 36″
• Max Temp:         –
• Finish:    Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.
• Max Load: As per Size
• Min Load: As per Size

Threaded Rods

To support Ducting System , Piping rack for hanging Supports (Clevis Hanger, Sprinkler Hanger, etc.), for hanging Anti-vibration Products (Spring hanger, Duct mount, Etc.)

• Type: Fastener
• Material: Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel.
• Sizes:Min – M6 (1/4″UNC) | Max – M72 (3″”UNC)
• Finish: Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, Yellow, Cadmium & Nickel.
• Max Load: As per Size
• Min Load: As per Size

Pipe hanger with EPDM Lining

Recommended for non-insulated stationary pipelines in a horizontal position. It can be used for supporting pipes along with the roof.

• Type: With EPDM lining, With lining-heavy duty, Easy fix pipe hanger with EPDM lining
• Material: Mild Steel. Also other materials can be provided on request
• Sizes: Min – 1/2″ | Max – 3″
• Max Temp: -20°C 110°C
• Finish: Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake & Epoxy Coated.
• Max Load: As per Size
• Min Load: As per Size

U Bolt With Lining

Used to secure piping to structural members. It provides vertical and horizontal support allowing axial movement.

Type:     With Lining

Material: Mild Steel. Also other materials can be provided on request Half perimeter is coverd with EPDM tube

Sizes:     Min – 1/2″ | Max – 36″

Max Temp:         –

Finish:    Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

Max Load: As per Size

Min Load: As per Size

Pipe hanger without Lining

PIPE HANGER is recommended for non-insulated stationary pipe lines in either a horizontal or vertical position. It can be used for supporting pipes along with the roof as well as walls.

• Type:     Without lining, With lining-heavy duty, Easy fix pipe hanger with EPDM lining
• Material:             Mild Steel. Also other materials can be provided on request
• Sizes:     Min – 1/2″ | Max – 3″
• Max Temp:         -20°C 110°C
• Finish:    Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.
• Max Load:           As per Size
• Min Load:           As per Size

U Strap with Lining

Supports piping system with vertical or horizontal fittings to walls or ceilings. Can be used as a restrainer when installed on top of structural beams, for limiting pipe movements due to thrust loads during sprinkler system start-up.

• Type: With Lining
• Material: Mild Steel. Also other materials can be provided on request
• Sizes: Min – 1/2″ | Max – 24″
• Finish: Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, & Epoxy Coated
• Max Load: As per Size
• Min Load: As per Size

U strap

Used for supporting a piping system with fittings vertically or horizontally to walls or ceilings. It can be used as a restrainer when installed on top of structural beams, for limiting pipe movements due to thrust loads during sprinkler system start-up.

• Type: Pipe Hanger. With and without lining.
• Material: Mild Steel. Also other materials can be provided on request
• Sizes: Min – 1/2″ | Max – 24″
• Finish: Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, & Epoxy Coated
• Max Load: As per size
• Min Load: As per size

Beam Clamp

Structural attachment to top or bottom of metal beams, purlins, channels or angel iron.

• Type: Hanging Attachment
• Material: Ductile Iron
• Sizes: Min – M10 (3/8” UNC) | Max – M12 (1/2” UNC)
• Finish: Plain, Electro-Galvanized & Zinc Flake
• Max Load: As per Size
• Min Load: As per Size

Drop In Anchor

For fixing threaded rod/stud in a Ceiling or concrete slab for providing Ducting support, Piping Rack.

• Type: Anchor
• Material: Mild Steel / Stainless Steel
• Sizes: Min – M6 | Max – M16
• Finish: Electrogalvanized
• Max Load: As per Size
• Min Load: As per Size

Wedge Anchor

Used for supporting a piping system with fittings vertically or horizontally to walls or ceilings. It can be used as a restrainer when installed on top of structural beams, for limiting pipe movements due to thrust loads during sprinkler system start-up.

• Type: Pipe Hanger. With and without lining.
• Material: Mild Steel. Also other materials can be provided on request
• Sizes: Min – 1/2″ | Max – 24″
• Finish: Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, & Epoxy Coated
• Max Load: As per size
• Min Load: As per size

Pipe covering Saddle

This 180-degree rounded piece of galvanized coated steel is used to protect piping insulation from compressing at pipe hanger locations.

• Type: Insulation
• Material: Mild Steel. Also other materials can be provided on request
• Sizes: Min – 1″ | Max – 10″(Customization available)
• Finish: Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

Cantilever Arm

Cantilever arms are a rigid structural device anchored to a wall or surface that supports overhanging structures without external bracing.

• Type: Strut Accessories
• Material: Mild Steel. Also other materials can be provided on request
• Sizes: Min – 21/2.5 – 300 MM | Max – 62D/2.5 – 1000 MM
• Finish: Electrogalvanized, Hot dip Galvanized, Zinc Flake
• Max Load: As per Size
• Min Load: As per Size